Welcome

This website is now an archive of the restoration and should only be used as a resource. Please visit the Lion Salt Works website for the most up-to-date information.



Welcome to the Lion Salt Works blog

The Lion Salt Works is a historic brine salt making site that is being restored and transformed into a unique heritage attraction. Led by Cheshire West and Chester Council, this £8million project will see the site reborn as a fascinating destination for tourists, day visitors and families and a valued resource for local communities, businesses and heritage interest groups.

Located in the village of Marston, close to the town of Northwich, the site lies adjacent to the Trent and Mersey Canal and is close to the historic Anderton Boat Lift. A substantial part of the site is a Scheduled Monument.

Restoration work has now started on the site, with an expected opening in spring 2015. The Lion Salt Works is currently closed to the public.

Thursday, 16 May 2013

How To…Build an Open Pan Salt Works


What makes up the buildings of an open pan salt works?

What does each building do?

In this part I will try to explain how an open pan salt works … well works!
This page is being constructed in parallel with the site restoration so if you can’t find a link it probably has not been written yet. Hold tight it will be on its way.

Brine Extraction

In order to make salt you need the raw product and this was extracted from the ground by a brine shaft or bore hole. The salt would be raised from the ground by means of a pump. But often the pressure of the underground stream would be strong enough to lift the brine from the ground alone.

On the site at the Lion Salt Works we have a number of buildings associated with Brine Extraction.

  • ·        Originally there was a brine shaft with a headstock.
  • ·        This was replaced by a nodding donkey and pump.
  • ·        The brine passed around the site in pipes.
  • ·        Finally the brine is stored in the brine tank.


Salt-making: The Pan House

The Pan House was where the salt was made. This involved heating the brine in the large metal pan.

How to make salt by the open pan method? [insert link]

It consisted of a brick stove where fires were lit, the pan and the wooden structure around.


The Lion Salt Works had five pan houses in the 1980s (numbered 1-5).

  • ·        Pan House 1 was demolished in the 1980s before the works closed in 1986 and is now a garden.
  • ·        Pan House 2 has largely fallen down but the pan and stove survive.
  • ·        Pan House 3 and 4 survive intact and are due to be restored.
  • ·        Pan House 5 was dismantled as part of the 2009 enabling works.

Salt-making: The Stove House

From the pan house the salt passed to the Stove House for drying. This was a large brick building that used the heat from the stove in the pan house to dry the salt in blocks. The upper part was a warehouse for storage and processing.

The Lion Salt Works had a stove connected to all the pan houses that survived into the 1980s (again numbered 1-5). Four of these survive whilst the fifth will be rebuilt.


  • Stove House 1 (AKA The Link Block) – this originally connected to Pan House 1 and was one of the first built on site in the 1890s. It has almost entirely collapsed.
  • Stove House 2 survives on site next to the canal. It again dates to the 1890s. It has a timber first floor unlike all the other stove houses.
  • Stove House 3 runs next to Ollershaw Lane and dates to 1900. It is made of brick with distinctive rail tracks used to support the warehouse floor.
  • Stove House 4 was built in 1956 to replace a series of four common pans [see link].
  • Stove House 5 was built in 1965. It has been dismantled but will be rebuilt as a purpose built area of the new museum.

How to build a Stove House? [http://thelionsaltworks.blogspot.co.uk/2013/05/how-tobuild-stove-house.html]

Salt-making: The Warehouses and the Salt Store

The warehouses were purpose built into the stove houses. These were used to process and pack the salt.
The lower grade common salt was stored in a large store house. The only surviving salt store on the site is the Coronation Salt Store located on the western side of Ollershaw Lane.


Transport to and from the salt works

The transport of raw material to and from the Lion Salt Works was very important. The most important raw material needed apart from brine was fuel for the stoves. This was originally coal but was changed to oil in the 1970s.

The transport that brought the coal to the works also took the salt away. The change in transport use can be seen throughout the works.

  • ·        The canal side
  • ·        The rail lines
  • ·        The loading bay

January 2013 - A Chilly Start


January on site began with a very chilly start. The cold weather from Siberia meant snow landed across the site and turned the restoration into a winter wonderland. Nice for pictures but not so good for putting up brickwork. The cold temperatures mean that the lime mortar will not set off.

Needless to say the restoration team worked round this and set off on other tasks on the site.

Stove House 5 excavations
Much of January was spent excavating the base of Stove House 5. A new concrete slab was required in order to support the restored building. This meant digging a large area 20m x 20m that was the footprint of the building.

Good news for archaeologists as it allowed us to excavate a large area of the earlier Alliance Salt Works http://thelionsaltworks.blogspot.co.uk/2012/11/the-lion-salt-works-history-of-site.html and conduct an excavation. This was ably undertaken by Oxford Archaeology North under the supervision of Graham Mottershead.

 Repairing the Walls between the Pan and Stove Houses
One of the big tasks was to repair the walls between the pan and stove houses. The problem with the building was that the walls were built on steel girders. This allowed a series of flues (tunnels) to pass from the stoves under the pan into the drying rooms in the stove houses (See how to build a Pan House http://thelionsaltworks.blogspot.co.uk/2013/05/how-tobuild-pan-house.html and Stove House http://thelionsaltworks.blogspot.co.uk/2013/05/how-tobuild-stove-house.html for details).

Unfortunately the effect of the salt on the metal meant it corroded and the walls collapsed!!

In order to rebuild the walls and support the interior of the stove houses a large concrete slab was inserted. This retained the interior of the stove house and also allowed the walls to be supported.

The new wall could then be built on top.




How to...Build a Stove House


Once the salt was made in the Pan House 3/ 4, it was left to dry and then carried through to the stove houses on open sided salt barrows by the lumpers.

The Stove House

The stove house was built of brick. It was built directly behind the pan house.

On the ground floor level inside it was filled with hard concrete material to the same height as the level of the pan. This was known as the flue level.

Above this was an open roofed warehouse level. This was built of either wood or steel and was open to the roof trusses.


The flue level

The flue level was where the blocks of salt were baked dried.

The stove house would have been filled by a series of low flues. These were built of thin brick walls covered in iron plates. The hot air would heat the iron plates on top of the flue. The hot air from the stoves would pass under the wall between the pan house and the stove house. From here it entered flues that ran up and down the stove houses, with at either end a cross-flue. Between the flues were a series of lower ‘ditches’ that became filled with loose salt from the blocks. The hot air then passed through a single opening at the end of the stove house to the chimney.

The flow of hot air was controlled by a series of gates in front of the chimney called ‘damper plates’. These were raised and lowered remotely by cables and pulleys connected to a weight.

The blocks of salt would be turned out into the flue level of the stove house and stacked by the lofter.

The lofter

The job of the lofter was to stack and dry the salt blocks. The salt blocks would be initially dumped onto the ground in the ‘ditches’ between the flues. The lofter would then stack the blocks on top of the flues like bricks to bake them dry. They would remain on the flues for two weeks.

Above the flues were a series of salt hatches. When the hatches were open they would allow the salt blocks to be passed up to the warehouse level. The lofter would do this using a pronged tool or by hand. He would stick these in the lump and throw them up through the salt hatches. He would work slowly around the blocks throwing them up to the level above. The blocks would then be processed in the warehouse above (see warehouse level above).

The warehouse

The warehouse was where the salt was finally dried and packed.

The floor of the warehouse was held up by a series of reused railway tracks held up by cast-iron columns.

The warehouse in Stove House 3 was an open space that originally connected directly through to warehouses in Stove House 1 and 4. The warehouse roof was supported by a series of wooden trusses on top of wooden posts that form an aisle.  Where the floor had become weak in, they had been patched using a series of reused boards from the side of salt tubs.

The roof of Stove House 4, in comparison, was built entirely of a steel frame constructed in 1956. This has been corroded by salt in places. The warehouse was dominated by the remains of two large crushing machines (see Crushing Machines).

The warehouse was traditionally where the women worked. They operated the crushing machines. They also packed the salt in sacks and packages.

How to...Build a Pan House


The pan house was the area where the salt was produced in the open pan. They contained the stove and the ferrous metal pan.

Construction

The pan houses were predominantly made of wooden timber. The timber did not react to the salt steam and would not decompose. The timbers become impregnated with salt over time.

The side walls of the pan houses consisted of a low brick ‘sill’ wall with a wooden wall above of long vertical timbers clad in horizontal planks.

The fronts of the pans were originally open with a wooden cover over the stoves known as a ‘caboose’. This allowed an open-air area for the men to feed the stoves with coal. The pans were altered in the 1970s and are now closed in.

The roofs are now plain pitched roofs but originally had sloped hipped roofs. They were covered with corrugated asbestos, but originally they would have been felted. They were supported by wooden trusses. They were open at the apex to allow steam to escape from the pans below. The sides were covered to allow the workers some protection from the weather.



Pans


The pans were large ferrous metal structures c. 15m in length by c. 8m wide and the sides were about 0.5m high. They were made of a large number of smaller metal plates welded and riveted together. They stood on large brick stoves 2m high.

Brine was fed into the pans via a series of ferrous metal pipes. These ran from the brine tank underground and emerged in the pan houses. The pipes turned and then passed into the top of the pan. The pipes were fed by gravity, the brine tank was at a higher level than the pans. A series of taps allowed the control of the brine to different areas of the site.

When the boil was finished the excess brine would be drained from the corner of the pan via a hole known as the ‘Cotter Hole’. The brine drained directly into the ditches that ran down the side of the stove (see below).

Along the front of the pan were several metal brackets and a series of planks known as dodging planks designed to allow access to clean the pan.

Along the side of the pan were a series of metal racks known as ‘salt dogs’ designed to hold the tubs as they were filled. This allowed the brine to drain back into the pan.



Stoves

The stoves were built of brick and fueled by coal and later oil. The coal was fed into the front of the pan via hatches by hand. See Pan House 3.

The stoves were originally fueled by coal (See Pan House 3). Coal was fed into the stove via small metal hatches. The fires were set at the front of the stove on metal grates.


Coal

Coal was brought to the site by small wagons on an individual train track. These tracks ran along the front of the pans and allowed coal to be stored adjacent to the stoves (see transport). Coal was stored behind the wooden barricades, a series of horizontal planks set on side.

Oil and the Oil Tank

In the 1970s the stoves were converted to oil. The oil was stored in the large oil tank adjacent to Pan House 4. The oil was fed into the pans via a compressor in the lean-to structure. The oil was fed into the pans by rubberised pipes and valves set in the front of the stoves. This was lit and hot jets of burning oil fired the pans.


The Hurdles

Down either side of the pan was a wooden walkway called the ‘hurdles’. It was from here the lumpmen drew the salt from the boiling pan. This was done with a large skimmer. The salt was skimmed and turned into the salt tubs, before drying on the pan and being turned out on the hurdle walkway. As the pillars of salt dried, excess brine drained through the wooden hurdles to the brick lined ditch below. These can be seen along the side of Pan House 3.
The hurdles led directly into the stove houses via two doorways. The blocks would be wheeled into the stove houses on salt barrows.

How to....extract brine from the ground


Salt has been produced in the Cheshire Area for over 2000 years. This was a as a result of Cheshire’s unusual geology which resulted in the formation of large salt deposits located beneath the ground.

Geology

The Cheshire Basin between the hills of the Delamere Forest and the Staffordshire and Derbyshire border once formed a large basin fed by the sea to the north. As the land levels to the north rose, this area was cut off from the sea but was occasionally inundated with sea water at high tides forming a large salt lake. Sedimentation and evaporation led to deposits of salt forming between layers of soft sedimentary rock known as marlstone.

The Cheshire salt-beds lie in the red or Triassic Keuper marls in a kind of basin comparable with an elongated saucer with its longest axis lying in a nearly north and south direction. The best-known and most important beds of rock salt are about the centre of this basin, in the neighbourhoods of Northwich and Winsford located below what is now the level of the sea.

Two beds of rock salt exist in Northwich an upper and lower bed. These beds spread from the Northwich town centre in the Baron Quay’s area to the north-east of Marston in an area around two miles in diameter. Each bed is from 25.6 to 27.4m (84 to 90 feet) in thickness at Marston and Wincham, divided from each other by 9 to 10m (30 to 33 feet) of marl and marlstone. For example salt was located at Neumann’s Mine between 60 feet and 144 feet below Ordnance Datum in the upper bed and 174 feet and 258 feet in the lower bed. The bottom part of the lower bed was found uniformly to be the best quality.

Brine Springs

The surface of the upper bed was impermeable and an underground stream of water would flow across it. Where this stream of water came close to the ground surface, at locations on the side of the Weaver or Wheelock valleys the water would emerge as a brine spring. The springs would look like most other springs, a small pool of water bubbling from the ground within shallow valley locations. The difference was within the water itself which would have been saline.

These became the first locations for salt making in the Prehistoric and Roman periods. Brine springs denote the locations of the Cheshire Salt towns of Northwich, Winsford, Middlewich and Nantwich.

Salt Mining

In the 17th century the first of a series of mines were begun in the Northwich region. A bed of rock salt was discovered in 1670 by the Smith-Barry family when they were searching for coal on the Marbury Estate, near Marston. This is believed to be the first mine sunk for rock salt into the upper bed of salt at around 50 feet below the surface. This resulted in the excavation of a number of ‘top rock’ mines around Northwich. The early top rock mines resulted in subsidence in the area.

By 1779 investigation below the upper bed of rock salt resulted in the discovery at the Marston Mine of a lower bed of salt at a depth of around 150 feet. This was also mined for a number of years until it began to be exhausted around 1850. During the 19th century the mines of the Northwich district began to collapse and subsidence was widespread.

Wild Brine Extraction

Wild brine extraction or brine ‘tapping’ had been carried on since the 17th century. This involved the sinking of a shaft to natural brine streams below the ground that ran over the upper bed of salt. This was then extracted and used to make salt by the open pan salt process.

The exhaustion of the mined rock salt supplies resulted in a rapid expansion of the wild brine extraction techniques. This was aided by more efficient pumps that allowed the brine to be pumped from both the upper and lower beds. The process of brine-tapping involved the sinking of a shaft to the brine stream, a dangerous occupation. AK Calvert describes the process;

In sinking to many of the springs, the supply of brine, when cut into, was so copious that the sinkers had to flee for their lives, ascending the shaft among the brine, and having no opportunity of seeing what was underneath.

The brine was subsequently pumped out of the ground to supply the salt works based at the surface. By the late-19th century brine shafts and traditional open pan salt works dominated the area around Northwich many controlled by the monopolistic Salt Union.

As the rock salt mines closed they were inundated with water creating vast underground reservoirs of brine. These were increasingly tapped for brine and it became increasingly common to deliberately flood the mines to provide new sources of brine. The erosion of the sides of the mine by the brine streams led to more and more mines collapsing and subsidence was widespread in the Northwich area. This can be seen by the large flashes that dominate the salt-making landscape.